Shandong Baotai Autoparts Co.,Ltd

High quality product, professional service, being the core supplier in auto parts industry!

Home > News > Content
Have You Seen Such A Brake Pads?
- Aug 22, 2017 -

Ceramic brakes and traditional brake pads are the biggest difference is no metal. Traditional brakes in the metal is the main friction material, braking force, but the wear and tear, and prone to noise. After the installation of ceramic brakes, in normal driving, will not produce abnormal clamor (that is, scratched sound). Because the ceramic brake pads do not contain metal components, so to avoid the traditional metal brakes and dual pieces (that is, brake pads and brake discs) rubbing metal clamor.

p201706131019378378728.jpg 441762ac-4ef2-40f7-9e04-386e1b0b915a.jpg

(1) stable friction coefficient. The friction coefficient is the most important performance index of any friction material, the relationship between the brake pad braking ability is good or bad. In the braking process due to friction heat, the working temperature increases, the general brake pads friction material by the temperature, the friction coefficient began to decline. In the practical application will reduce the friction, thereby reducing the braking effect. Ordinary brakes friction material is not mature, the friction coefficient is too high caused by the direction of the brake out of control, burned, scratched brake disc and other unsafe factors. Even if the brake disc temperature up to 650 degrees, the ceramic brake pads friction coefficient is still 0.45-0.55 or so, to ensure that the vehicle has a good braking performance.

(2) ceramic has good thermal stability and low thermal conductivity, good wear resistance. Long-term use of the temperature at 1000 degrees, this feature allows the ceramic can be suitable for a variety of high-performance brake material high performance requirements, to meet the brake pads high-speed, security, high wear and other technical requirements.

(3) Ceramic has good mechanical strength and physical properties. Able to withstand greater pressure and shear force. Friction material products in the assembly before use, the need for drilling, assembly and other mechanical processing, in order to make brake pads. Therefore, the friction material must be required to have sufficient mechanical strength to ensure that no damage and fragmentation occurs during processing or use.

Ceramic brake pads are different from the general brake pads, with good applicability, not only long life, but also has good comfort and safety, choose a suitable brake pads is a very important thing. Not only can reduce energy consumption, but also to protect travel safety.